Owens Corning Roofing in Selma, CA

Owens Corning Roofing in Selma, CA | Brennan Roofing Co Fresno

As a Roofing Company - Selma locals rely on, we provide independent Owens Corning roofing service with a crew that knows how Duration and Oakridge shingles behave on the steep-pitched bungalows and 1970s ranches that fill this town. What sets our work apart here is simple: we’ve spent over a decade watching how Owens Corning products fail on Selma’s specific housing stock, and we fix them accordingly. Call (559) 785-2160 for a straight answer about your roof.

Call (559) 785-2160

Why Selma Residents Choose Us for Owens Corning Service

Brennan Roofing Co Fresno is an independent Owens Corning service provider. We’re not manufacturer-affiliated or authorized, which means we tell you what your roof actually needs rather than what a corporate warranty program wants us to sell. Travis Oakley runs the crew, and he learned roofing at Los Angeles Trade-Technical College before putting in years on residential and commercial jobs across Southern California. He’s been running crews in the Fresno area and the surrounding Valley for over a decade now, with a good stretch of that work done in the Tower District on older wood-framed homes that punish anyone who cuts corners on underlayment. That experience carries directly into Selma, where many homes were built in the 1920s through the 1940s and need the same careful attention to framing and decking before any shingle goes down. We follow Owens Corning sales & service protocols on every job here, and we stock common Owens Corning shingle profiles locally for faster turnaround when a Selma homeowner needs a patch done right.

Common Owens Corning Roofing Problems We Solve in Selma

• Granule loss on south-facing Duration slopes. Selma’s summers routinely push past 100°F, and Duration shingles on south-facing roof planes take the brunt of that UV exposure. The granules wear off faster, exposing the fiberglass mat underneath. Once that mat shows through, the shingle gets brittle and starts cracking. We see this most often on ranch-style homes built in the 1960s and 1970s where the south slope faces the street and gets full sun from morning to evening.
• Nail-pop blow-throughs on steep bungalow roofs. Oakridge shingles from the 2000s have a known failure mode on steep-pitched roofs: as the decking expands and contracts through Selma’s hot days and cooler nights, nails back out and push through the shingle above. The holes let water in during winter storms. We check rafter spacing and deck condition before any repair, because replacing the shingle without fixing the movement underneath means doing the job twice.
• Curling and tearing on original 3-tab shingles. Many Selma homes still carry the original 3-tab asphalt shingles from the 1970s, and those shingles are now curling at the corners and tearing along the sealant line. The dark streaks you see from the street are granule loss, not just dirt. Once the sealant strip fails, wind gets under the tabs and peels them back. A patch might buy a season, but a roof this age usually needs a full replacement.
• Hairline cracks in valley metal. The metal flashing where two roof planes meet expands and contracts with Selma’s temperature swings, and over time that thermal movement causes hairline cracks. Water sneaks through during the rare but intense winter storms we get here. We replace the valley metal and re-seat the surrounding Owens Corning shingles so the repair holds through the next decade of heat cycles.
• Decking failure on pre-1940 homes. Selma’s older bungalows often have original 1×6 deck boards that have shrunk over 80 or 90 years of dry heat, leaving half-inch gaps between boards. Owens Corning’s heavier Duration shingles need a solid, continuous deck to lay flat and seal properly. We check for this before every installation, and we’ll tell you honestly if you need supplemental decking before new shingles go on.

Owens Corning Service in Selma: What Local Conditions Mean for Your Equipment

Here’s something true about Selma that doesn’t apply the same way in Fresno or Madera. Many homes built before 1940 in this town still have their original roof decks cut from old-growth pine, and that matters enormously when you’re installing modern Owens Corning shingles. The old-growth pine is tighter-grained and drier than anything you’d buy today, and after eight decades of Selma heat, the boards have shrunk. We measure rafter spacing on every pre-war home we touch because some 1920s bungalows along the historic downtown grid were framed on 24-inch centers, which is too wide for today’s heavier Duration shingles without supplemental decking. If you lay Duration over a deck that flexes, the shingles won’t seal properly, and you’ll get blow-offs and leaks within a few seasons. Travis puts it this way: “Tell me what you’re seeing and I’ll tell you what it actually means.” When we tell a Selma homeowner they need new plywood decking before shingles, that’s not an upsell. It’s the difference between a roof that lasts 30 years and one that starts leaking in three.

Owens Corning Models & Products We Service in Selma

We service the full Owens Corning shingle lineup: Duration® Series Shingles, Duration STORM® for Selma homes that need Class 4 impact rating, Oakridge® Shingles, TruDefinition® Duration Designer Colors Collection, and Berkshire® Shingles for higher-end historical replacements. For color and profile matching, we prefer genuine Owens Corning replacement shingles, especially on designer Duration colors that require ordering exact dye-lot batches. Underlayment and flashing are where we use high-quality aftermarket materials meeting or exceeding code, because the aftermarket options often perform better in Selma’s thermal cycle than OEM underlayment. We stock common Owens Corning profiles locally for fast patch work, and we’ll order specialty colors with a straight timeline on when they arrive.

Owens Corning Service Pricing in Selma

Key Takeaways

• We’re an independent Owens Corning service provider, not manufacturer-affiliated or authorized.
• Selma’s heat causes south-facing granule loss and decking shrinkage on pre-1940 homes.
• We prefer genuine Owens Corning shingles for color and profile match, especially on designer colors.
• Written pricing before any work starts. No number changes at the door.
• 365-Day Done Right Promise: every repair and installation guaranteed in writing for one full year, with a free return visit if it fails.

FAQs – Owens Corning Roofing in Selma

Service Areas Near Selma

We serve Selma and the surrounding towns, including Fowler, Dinuba, Kerman, and the Fresno metro area. If you’re in Owens Corning service in Fresno or Owens Corning service in Madera, we cover those areas as well. For the full list of cities, see our Selma service area page.

Book Your Owens Corning Service in Selma Today

If your Owens Corning roof is streaking, curling, or leaking anywhere in Selma, call (559) 785-2160. We answer with a live person around the clock, and we’ll schedule a free estimate at a time that works for you. The price goes on paper before any work starts.

Written by Travis Oakley, Owner at Brennan Roofing Co Fresno, serving Selma and the surrounding Valley since 2000.