Tamko Underlayment & Deck Repair Nationwide

Tamko Underlayment & Deck Repair: The Fresno Owner’s Guide

We stock and install Tamko-compatible underlayment and deck repair materials across Fresno, with typical installed repair costs running $425 – $1,850 depending on how far the damage extends across the deck and underlayment layers. Most jobs are completed in a single day once we’ve assessed the scope. The call usually starts the same way: a homeowner notices a ceiling stain, a damp spot in the attic, or shingles lifting at the eaves and wants to know if the problem is surface-level or structural. Beneath the shingles, the Tamko underlayment and the wood decking beneath it are the two layers that actually keep water out of the house. When either one fails, the shingles above them become decoration.

Call (559) 785-2160

Which Tamko Models This Applies To

The underlayment and decking concerns we handle apply to homes roofed with Tamko shingle lines including Heritage, Elite Glass-Seal, Titan XT, and StormShield. The critical thing to understand is that the underlayment is a distinct layer from the shingles themselves. Tamko’s shingle warranty covers the shingle material. The underlayment and decking are site-installed components that carry their own lifespan, and in Fresno’s climate, that lifespan gets tested hard. When we open a roof in this valley, the failure point is usually at the underlayment seams or at the decking fasteners, not in the shingle itself.

If you need to identify what’s on your roof, start in the attic. Look for stamp marks or barcode labels on the underside of the decking, and check any leftover shingle bundles in the garage for the Tamko model name. We can also identify the underlayment type by taking a small sample from a vent edge or a rake during an inspection. The gotcha most homeowners hit: mixing an aftermarket underlayment that’s too thin with a Tamko shingle system that expects a specific standard. We use underlayment that matches or exceeds the original spec, not whatever’s cheapest at the supplier that week.

Signs Your Tamko Underlayment & Deck Repair Is Failing

• Water stains on ceilings or upper wall corners. This tells you the underlayment has been breached somewhere and water is traveling down through the decking. By the time you see this, the deck section beneath the leak is usually soft.
• Dark streaks or “ghosting” on attic rafters near the eaves. That’s moisture wicking through the decking and leaving mineral deposits. It often shows up first on the west-facing side in Fresno, where wind-driven rain hits hardest.
• Shingles lifting or flapping at the edges. When fasteners lose their grip in deteriorated decking, the shingle can’t hold. The underlayment beneath has likely been exposed to sun and air, which degrades it faster.
• Visible daylight through the roof boards from inside the attic. Any gap you can see from below is a path for water. This happens when decking pulls away at the seams or a section was cut poorly on the original install.
• Granules from Tamko shingles clogging gutters in heavy volume. Some granule loss is normal over 15-plus years. A sudden heavy shed means the shingle mat is failing and water is sitting longer against the underlayment.

Replacement Cost & What’s Included

In Fresno, here’s what we typically see for Tamko underlayment and deck repair work.

• Isolated repair to one deck section (4×8 sheet replacement plus underlayment patch, shingles re-laid): $425 – $750
• Multiple deck sections with underlayment replacement along the affected slope: $850 – $1,450
• Full underlayment strip-and-replace over an entire roof plane, with decking repair as needed: $1,400 – $1,850 and up depending on square footage and decking condition

The spread comes down to how many deck sheets have gone soft, whether the roof pitch makes staging difficult, and how much of the underlayment needs to come off to get to solid material. Every quote includes the written line-item price before any work starts: parts, labor, disposal, and the permit if the repair scope requires one. The price on that paper is the price, no door knock adjustment. All of it is covered under the 365-Day Done Right Promise. If the repair fails within one year, we return and fix it at no charge, in writing.

DIY or Call Us?

Here’s the honest split. You can safely check a few things from inside: look in the attic for the stain patterns and daylight gaps, check ceiling corners after a rain, and keep an eye on shingle edges from the ground. What you should not do is pull up shingles or cut into underlayment on a pitched roof without fall protection and the right hand tools. It’s not gatekeeping, it’s math. One wrong step on a 6:12 roof in July’ll cost you more than the repair. Also, if you peel back underlayment and don’t reseal it correctly, you create the exact leak you were trying to find. We handle this work year-round in Fresno, and the inspection to tell you definitively what’s failing costs you nothing.

Tell me what you’re seeing and I’ll tell you what it actually means. Call us at (559) 785-2160 and we’ll put a technician on it.

Do You Stock Tamko Underlayment or Do I Have to Wait?

We stock common Tamko-compatible underlayment grades on our service vehicles, along with standard CDX and OSB decking sheets sized for typical Fresno rafter spacing. If the job requires a specialty Tamko product, we source it through our local supplier network, usually same-week. There should never be a blind spot where you’re told a part number and left to hunt it down yourself. That’s our job.

Does Tamko Cover Underlayment Under Their Shingle Warranty?

Not usually. Tamko’s shingle warranty covers the shingle material. The underlayment and decking beneath it are considered site-installed components with their own service life. That life runs shorter in Fresno, where summer attic temps routinely exceed 130 degrees and cook underlayment from below while the surface bakes from above. If you’re within the shingle warranty period, we can help you document the condition so you have a real conversation with Tamko or your original installer.

Can You Just Patch the Underlayment Without Replacing Decking?

Only if the decking beneath that section is still solid and dry. We’re not going to lay new underlayment over soft or delaminating wood. That’s not a repair, that’s a postponement, and you’ll be paying twice. If the decking holds a fastener and doesn’t flex under foot pressure, a patch is sometimes the right call for an isolated tear.

How Long Does a Tamko Underlayment & Deck Repair Take?

Most single-section repairs are done in one working day from tear-off to shingles re-laid and the site cleaned. A full roof-plane underlayment replacement usually runs two to three days depending on weather and roof size. We quote the timeline in writing alongside the price, and a live person answers the phone around the clock if you need to check on progress.

What Should I Do Right Now While I Wait for the Repair?

Place a bucket under the visible leak if it’s dripping, move valuables from the area, and take photos of the ceiling stain or attic dampness. Don’t tarp the roof yourself if it means getting on a ladder in the rain or wind. If the leak is active and spreading, call us at (559) 785-2160 and we’ll talk through whether a temporary tarp makes sense until the crew arrives.

FAQs