Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Tamko Roof Inspection in Fresno: What to Know First
An independent Tamko roof inspection in Fresno typically costs $225 to $425 for a full visual and hands-on assessment, and most reports are delivered within 48 hours of the site visit. We are not a Tamko dealer and we are not authorized or affiliated with the manufacturer. What we are is a Fresno roofing company that has inspected hundreds of Tamko roofs across the Valley, and we will tell you exactly what condition yours is in, what it needs, and what it does not need. No upsell, no scare report, just a straight answer.
If you own a Tamko roof in Fresno and want to know whether it is holding up, call (559) 785-2160 and ask for an inspection. You will get a live person, not a voicemail.
Key Takeaways
- We inspect Tamko roofs without manufacturer authorization, which means our findings are not filtered through a warranty claim agenda.
- Fresno heat is harder on Tamko shingles than rain ever will be. Granule loss and UV fatigue show up here faster than in coastal climates.
- You get a written condition report with photos, measured wear, and a plain-English explanation of what needs attention now, later, or never.
- Every inspection follows The Garrison Standard: written price before we start, background-checked techs in uniform, and a full-year guarantee on any repair we recommend and you approve.
Styles & brands we work with
How Tamko Products Fail – and How We Fix Them
Tamko makes a good shingle. We install it. We also repair it. But after fifteen years of inspecting roofs in this Valley, we know exactly where Tamko products show their age first. Here is what we find on Fresno roofs.
- Heritage and TW Series shingle cupping at the eaves. Tamko’s Heritage line is the most common shingle we see on Fresno homes. The failure we find most often is cupping at the outer edge of the shingle, right where the drip edge sits. It happens when the shingle’s asphalt core dries unevenly under direct sun. The shingle lifts, water gets a place to sit, and the lift becomes permanent. The fix is almost always replacing the affected shingles before the decking underneath gets involved.
- Nail-strip tear-through on Heritage Pro Edge shingles. This one is specific. Tamko’s Pro Edge shingles have a wider exposure, which looks great, but the nail strip sits higher on the shingle body. In Fresno wind events, which come through March and April, shingles that were nailed slightly high tear through the nail line. We see it as classic blow-offs after storm season. Fixing it right means hand-sealing the torn shingles or replacing them, and checking the fastening on the courses around the damage. Slapping roofing cement on it will not hold through the next wind event.
- MetalWorks steel shingle oil-canning on south-facing slopes. Tamko MetalWorks is a steel shingle system, and Fresno’s south-facing roofs take direct sun from about 10 a.m. to 5 p.m. through summer. That heat causes oil-canning, which is the visible waviness across the metal surface. It is cosmetic in most cases, not structural, but homeowners want to know whether it will leak. It generally will not, if the flashing was installed correctly. We check the flashing, the fasteners, and the eave closure before we tell you it is cosmetic.
- Flashing failures at valley transitions, regardless of shingle line. This is not a Tamko design fault, but it is the most common leak source on Tamko roofs we inspect in Fresno. Valley metal gets hammered by our summer expansion cycles, and the sealant at the valley edges fails long before the shingles do. On a Tamko Heritage or Elite Glass-Seal roof, we check every valley first. It is where the leak is, even when the shingles look fine.
- Storm damage from late-winter Fresno hail and wind. Tamko shingles are impact-rated, but nothing made of asphalt likes a hailstorm. We inspect for granule bruising, which is a circular pattern of granule loss from impact, and for cracked shingle edges from wind-driven debris. Bruising does not always leak, but it shortens the life of the shingle. If the roof has been through a Fresno hail event, we check it and document it so you can decide whether a claim is worth pursuing.
Our Tamko Roof Inspection Process
This is what happens when you call Brennan Roofing Co Fresno for a Tamko roof inspection in Fresno. It is the same process every time, because a standard that changes from job to job is not a standard.
- 1
The call. You reach a live person at (559) 785-2160. We schedule the inspection and confirm the time window. No callbacks, no automated routing.
- 2
The walk-in. A background-checked tech arrives in uniform, inside the promised window. He introduces himself by name and walks the interior with you first, looking for ceiling stains and drywall cracking that point to active leaks.
- 3
The roof inspection. We walk every slope if it is safe to do so. Steep pitches or second-story work may be inspected from a ladder with binoculars at the gutter line and in the attic. High-tension work like walking a steep tile-to-shingle transition only happens if the roof is walkable.
- 4
Parts and materials determination. If we find damage, we identify whether the damaged material is Tamko Heritage, Elite Glass-Seal, Pro Series, or a different Tamko line so the repair matches the existing roof. We use OEM Tamko materials when the warranty is still active and the match matters. If the warranty has expired or the shingle is discontinued, we will tell you and use a quality aftermarket match with the same dimension and profile.
- 5
The written report. You get a condition report with photos of what we found, measured wear patterns, and a plain-English explanation of the risk and the fix. Written price before any work starts, always.
- 6
The follow-through. If you approve work, the repair gets a written one-year guarantee. If it fails inside that year, we return for free. That is the 365-Day Done Right Promise, and it is the same for a two-hour repair or a full tear-off.
See the difference
Before
After
Before
After
Before
AfterWhat Tamko Roof Inspection Costs in Fresno
Here are real numbers for Tamko roof inspection and common repairs in Fresno, based on what we have charged actual customers.
- Full roof inspection with written report and photos: $225 to $425, depending on roof size and accessibility.
- Leak investigation that turns into a simple repair: $300 to $650, including the inspection time and fixing the source, not just the symptom.
- Valley flashing replacement on a Tamko shingle roof: $700 to $1,400 depending on valley length and roof pitch.
- Cupping shingle course replacement: $450 to $900 for a typical eave-line repair.
- MetalWorks oil-canning evaluation and fastener tightening: $350 to $600, with the caveat that oil-canning is usually cosmetic and the tightening may not remove the visual wave.
What moves the price: roof pitch, number of slopes, attic access, and how much of the existing material has to be matched. Steep roofs and hard-to-reach valleys cost more. We never bury that in the final bill. The price goes on paper before we start, and it does not move at the door.
Call (559) 785-2160 and we will give you an exact number for your roof. The estimate is free.
Why Fresno Homeowners Call Brennan Roofing Co Fresno for Tamko Work
There are a lot of roofers in Fresno who will inspect a Tamko roof. Most of them know how to look for cracked shingles and called-in leaks. The difference is what happens after the report is delivered. We do not sell from a scare sheet. If your Tamko roof has five years left, we will say so and tell you what to watch. If it is done, we will show you exactly why, square by square.
We are an independently owned and operated member of the Garrison Partners family, founded in 2000. Every technician who steps onto a Fresno roof is background-checked and uniformed. Every job begins with a written price in hand, before any work starts. And every repair carries the 365-Day Done Right Promise. That guarantee is in writing, for one full year, and we return for free if the repair fails inside that period. When a Tamko roof needs something we cannot confidently match, we bring in what we know from installing GAF, Owens Corning, and CertainTeed systems so you are not locked into one manufacturer’s quirks. You get a straight answer about what your roof actually needs, from people who stand behind the work in writing.
FAQs
No. An inspection does not void a Tamko warranty, as long as the inspector does not perform a repair using materials or methods that the warranty prohibits. We are an independent Tamko service provider, not a Tamko-authorized contractor, so we are careful to note what is warranty-relevant and what is not. If your warranty is active and the fix should go through Tamko’s process, we will tell you that instead of doing the work and jeopardizing your coverage.
Sometimes. Tamko discontinues and renames lines periodically, and colors shift subtly between production years. If your shingle is out of production, we source the closest available aftermarket match by size, profile, and color blend. We will show you the match before we install it. If the difference is too visible, we will tell you that too, and discuss replacement options for the whole slope. Call (559) 785-2160 if you have a discontinued Tamko color and want an honest answer.
Most inspections are scheduled within three to five business days. If you have an active leak or storm damage, we move faster. We do not promise same-day inspection on a routine call because we do not want to walk a roof in fading light and miss something. Tell us on the phone what you are seeing and we will tell you what it actually means. Leaks get priority.
Yes, when it matters. On a roof with an active Tamko warranty, we use OEM Tamko materials so the warranty stays clean. On an expired or discontinued line, we use a quality aftermarket match that lets us fix the roof without forcing a full replacement. Either way, you get a written line-item price for the parts before we order them.
Yes. We document the damage with photos and measurements, and we meet with your adjuster if you want us there. We do not file claims for you and we do not negotiate your settlement. What we do is give you the straight documentation an adjuster can work from. Fresno hail and wind damage is real, and Tamko shingles show impact damage in specific ways. We know what to look for.
Get a Straight Answer on Your Tamko Roof
If you own a Tamko roof in Fresno and want to know what shape it is in, call (559) 785-2160 and schedule an inspection. You will reach a live person. We will show up inside the window, walk the roof, and hand you a written report with a price on paper for anything that needs fixing. No pressure, no mystery, no upsell. That is the way Travis Oakley and the Brennan Roofing Co Fresno crew have run every inspection in this Valley for over a decade, and it is not changing.
Written by Travis Oakley, Owner, Brennan Roofing Co Fresno at Brennan Roofing Co Fresno, serving Fresno and nearby areas.