Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Tamko Roofing Company in Fresno: What to Know First
Tamko roofing company work in Fresno typically means one of three things: a leak repair on an existing Tamko shingle roof, a full replacement using Tamko materials, or an inspection after a Valley storm. We handle all three as an independent Tamko service provider, and most repair jobs are quoted and scheduled within a few days, not weeks. The honest posture on price is this: a Tamko repair in Fresno usually runs between $350 and $900, while a full Tamko shingle replacement on an average Fresno home lands between $9,500 and $16,000 depending on roof size, tear-off work, and decking condition. You’ll get the written number before any work starts, no exceptions.
This page is for Fresno homeowners who already have Tamko shingles or are weighing Tamko for a re-roof, and who want to know how this brand holds up in Central Valley heat. If you have a leak now, call us at (559) 785-2160 and a live person answers.
How Tamko Products Fail – and How We Fix Them
Tamko makes a solid shingle. The brand isn’t the problem. The problem in Fresno is that our summers punish every brand in specific ways, and Tamko has a few known stress points we see on a regular basis. Here’s what we actually find on Tamko roofs in the Valley:
- Heritage series granule loss on south-facing slopes. Tamko’s Heritage line, especially the Heritage 30, loses granules faster on the south and west exposures where Fresno sun hits hardest. The shingle surface gets patchy and thin within 12 to 15 years, which shortens the roof’s useful life. Our fix is a slope-by-slope inspection, and if the granule loss is advanced on one plane only, we’ll re-roof just that plane when the structure allows it, instead of selling you a full roof you don’t need yet.
- Titan XT nail-line tear-outs after wind events. The Titan XT is a heavier shingle with a wider nail zone, but we still see nail-line tear-outs after the big March and April wind years in Fresno. The shingle didn’t fail; the original installer missed the nail line. We pull the damaged course, check the underlayment below, and re-set with proper fasteners and a fresh seal strip, not just adhesive.
- MetalWorks stone-coated steel fastener backout. Tamko’s MetalWorks panels expand and contract a lot in Fresno’s 40-degree overnight-to-100-degree afternoon swings. Over a decade, that movement can back out fasteners enough to let water slip under the panel edge. We see this mostly on patio covers and detached garages. The fix is replacing the failed fastener with a larger-gauge screw, re-seating the panel, and sealing the penetration properly.
- Vent closure flashings separating on the waterproofing shingle underlayment. Tamko’s TW Underlayment is a good product, but it’s only as good as the details over it. On older Tamko installs around Fresno, the pipe boot and vent flashings separate after years of UV and heat cycling, and water tracks in along the underlayment edge. We replace the flashing assembly and re-tape the lap with a compatible underlayment, not just caulk over the crack.
- Tamko StormFighter shingle creasing from foot traffic. StormFighter is a thicker shingle, which is great for impact, but it creases when a tech walks it wrong in hot weather. We’ve fixed plenty of roofs where the previous company’s crew left crescent-shaped crease marks that later opened into splits. On Tamko jobs, our guys follow a set walk pattern and stay off the hottest slope between 1 and 4 p.m. from June through September.
Styles & brands we work with
Our Tamko Roofing Company Process
Every Tamko job in Fresno follows the same steps, whether it’s a $400 repair or a $15,000 re-roof. The process is part of the Garrison Standard: written price before any work starts, uniformed techs, and a job site left clean.
- 1
You call, a live person answers. Not a voicemail tree. You describe what you’re seeing, and Travis Oakley or one of our leads asks the right questions: where’s the water showing up, how old is the roof, what does the shingle surface look like.
- 2
We inspect the roof and document what we find. We’re looking for the brand-specific failure modes listed above, plus decking condition, flashing integrity, and ventilation. You get photos and a plain-English explanation of what’s actually wrong, not a scare pitch.
- 3
Written price on paper before any work starts. The quote lists materials, whether we’re using OEM Tamko components or a quality aftermarket equivalent, and the labor. That number does not move at the door.
- 4
The work gets done right. On repairs, we match the repair to the shingle line and seal properly. On replacements, we’re pulling permits, installing to code, and paying attention to the details that fail first: drip edge, underlayment laps, and flashing. We never reuse old flashing to save a few bucks.
- 5
We test, then walk you through everything. If there was a leak, we run water on the repaired area before we leave. You see the finished work, you get the written guarantee, and we take the old materials with us.
- 6
The 365-Day Done Right Promise kicks in. If anything fails within one full year, we come back and fix it at no charge. In writing.
See the difference
Before
After
Before
After
Before
AfterWhat Tamko Roofing Company Costs in Fresno
Repair work on Tamko roofs in Fresno runs the range below. These are real numbers we’ve put on paper for jobs across the city, from older Tower District bungalows to newer subdivisions up near Woodward Park.
- Single leak repair (flashing, pipe boot, or small shingle section): $350 to $700
- Multiple leak repairs or storm damage on one roof: $700 to $1,400
- Partial re-roof of one damaged plane (including underlayment and decking patchwork): $2,800 to $5,500
- Full Tamko shingle re-roof with tear-off, typical Fresno home (1,600 to 2,400 sq ft): $9,500 to $16,000
- Tamko MetalWorks roof on a patio cover or outbuilding: $4,000 to $8,000
What moves the price: roof pitch, number of stories, decking rot that wasn’t visible until tear-off, and whether the home needs ventilation upgrades. We include the decking inspection in the quote so you’re not surprised later. Call (559) 785-2160 and we’ll send someone out to put a real number in front of you.
Why Fresno Homeowners Call Brennan Roofing Co Fresno for Tamko Work
Because we know this brand well enough to tell you what it actually needs, and we deliver under the same standard on every job. The Garrison Standard means a written price before any work starts, background-checked uniformed technicians who show up inside the promised window, and a full-year written guarantee on everything we touch. If a repair fails within 365 days, we come back and make it right at no charge. That’s not a slogan. It’s the way Travis runs the company.
We also install and service GAF, Owens Corning, and CertainTeed, so if a Tamko shingle is discontinued or you’re better served by a different brand for a particular roof profile, we’ll tell you straight. We’re not married to one manufacturer. We’re married to the roof being right. And we answer the phone around the clock with a live person, which means when the water starts coming in at 11 p.m., you’re not leaving a message and hoping.
FAQs
No. Tamko’s limited warranty covers manufacturing defects, and a properly performed repair by a qualified roofing contractor does not void it. What can void a warranty is improper installation by the original contractor, which is why we document every repair with photos and note any installation defects we find. As an independent Tamko service provider, we’re not a warranty agent, but we build repairs to the same standard the manufacturer expects.
Call (559) 785-2160 if you want us to inspect for install defects before you file a claim.
Both, and we’ll tell you which is the right choice for your situation before you pay for anything. For warranty-sensitive repairs and color-critical spots, we’ll source OEM Tamko components. For flashing, pipe boots, and underlayment repairs, we use quality aftermarket parts that meet or exceed the original spec, often at a lower price. The decision goes on the written quote, not in some verbal gray area.
Most Tamko leak repairs are scheduled within 2 to 5 business days of your call, and we offer tarping for active leaks to protect the interior until we can get on the roof. If you see water coming through the ceiling, call (559) 785-2160 and describe what you’re seeing. Travis will tell you what it actually means and whether it’s an emergency or a weekend project.
It depends on the age of the shingles, the extent of the damage, and the condition of the decking underneath. If the roof is under 12 years old and the damage is isolated, repair is almost always the right call. If it’s a 20-year-old Heritage roof with granule loss on multiple slopes and water stains in two rooms, replacement will likely cost you less than chasing leaks for the next three years. We’ll give you the straight answer, not the answer that makes us more money.
Call (559) 785-2160 for an inspection and a written recommendation.
Yes. Every full re-roof in the city of Fresno goes through the proper permit process. We pull the permit, schedule the inspection, and make sure the job passes before we call it done. Repairs don’t typically require a permit, but if the scope crosses into re-roof territory, we’ll handle the paperwork. That’s part of the written quote.
Written by Travis Oakley, Owner, Brennan Roofing Co Fresno at Brennan Roofing Co Fresno, serving Fresno and nearby areas.